To wake the lightsaber:Hold down the power button for 1 seconds. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode.
Awake mode operation:
Pressing the power button will turn the blade on and activate the sounds and effects.
When the blade is lit, the power button operates thusly:
Sleep mode operation:
When the saber is in deep sleep there will be no lights or sounds to keep the on power for long time.
Issue 1 - Saber has no sound
Saber may be in mute mode. Turn off the saber, then hold the button for 0.5 seconds to change sound volume.
Issue 2 - Saber loses either red, blue or green colours does not light up at all, or has no swing or clash sounds.
Charge the battery for one hour, as this is likely a low battery issue. Removing and reinstalling the battery may fix it if the issue is not related to charge.
Issue 3 - When charging the saber cues are 'charging' then immediately indicated 'ready'
The battery is not making contact properly with the plates inside. Open the saber and carefully adjust the connectors so that the positive and negative both touch easily.
PLEASE NOTE THAT YOU MUST INSERT THE BATTERY CORRECTLY VIA THE POSITIVE & NEGATIVE AS MARKED INSIDE THE SABER AS THIS COULD CAUSE THE BOARD TO BURN OUT & VOID WARRANTY.
Issue 4 - If any other problem occurs and the above methods won't fix it please contact - Padawanoutpost@gmail.com